Sunsetter Vista awning

SunSetter® Vista awning lets you quickly create a beautiful outdoor room. Opens easily by hand crank to give you a shady, cool, protected oasis whenever you want. Awning retracts against your house when not in use.

• Fabric blocks 99.9% of UVA and UVB rays.
• 100% waterproof fabric.
• Up to 20 degrees cooler under the awning.
• Retracts flat against the house when not in use.
• Available in widths from 10' to 18'.
• 10' and 11' retractable awnings extend out 9' from the house.
• 12' to 18' retractable awnings extend out 10'2" from the house.
• Fits under eaves and overhangs as low as 7'6".
• Double stainless steel cable system ensures smooth operation.
• Aircraft-quality aluminum arms won't rust or corrode. Baked-on enamel cream-colored finish.
• Can be installed on any kind of siding, including wood, masonry, brick, aluminum, and vinyl.
• Awning is preset at the factory with a 29" pitch from the top of the brackets to the lowest part of the front bar when the awning is open fully. Pitch is adjustable during installation.
• Attaches permanently to your home. No need to take it down in the winter. Just retract awning.
• The hand crank is on the right side facing your house.
• 5-year mfg. limited warranty.

SunSetter's 5-layer fabric is superior to ordinary awning fabrics in quality, strength, and durability. 100 percent waterproof fabric will never leak. Two color-pigmentation layers for long-lasting color. Protective coats of acrylic (top and bottom) let the fabric stand up to UV rays as well as wear and tear. Easy-clean fabric.

Sunsetter Vista awning can even help reduce your utility bill! By shading your house from direct sunlight, your energy bill will be lower.

Twelve colors to choose from. See Sunsetter awning color choices on our main site and then use your back button to return to this page. Select from 5 stripes and 7 solid colors. Please note that on striped models, the front 4.5' of the awning is striped and the rest is solid cream.

How to measure for your Sunsetter awning:


1. Measure the height of the wall where you want to install the awning. You need at least 7'6" from the deck or patio floor up to any eave, gutter, or roof overhang to install a SunSetter awning.

2. Measure along the side of your house and decide how wide an awning you want. SunSetter awnings come in pre-cut widths from 10' to 18', in 1' increments. Except for the 10' size, all awnings require an unobstructed area on the wall that is 8" high x the width of the awning. For 10' model, allow an extra 2". (11' to 18' models measure exactly the same size as the awning size, i.e., 12' awning requires 12' of space. 10' awning measures 10'2" to accommodate lateral arm.)

3. Choose a Wall Bracket (for most installations) or a Soffit Bracket (if your awning will be mounted to eaves or overhangs; a soffit is the underside of the eave/overhang). 10'-13' sizes include 3 brackets; 14'-16' sizes include 5 brackets, 17'-18' sizes includes 7 brackets.

Includes installation booklet and video. Installation is a 2-person job and generally takes 1-3 hours.

This item will be delivered by truck to your curbside.